• Phase I: Foundation Pre-Pour Inspections are performed within 24-48 hours before the concrete is poured for the foundation. The inspector will check the vapor barriers, the form boards, rebar, rebar elevators and any penetrations for proper barriers. The inspector will also check for foreign objects anywhere the concrete will go that could leave a void after deterioration. Finished grade around the foundation is also checked to verify adequate site drainage.
• 
  

• The Phase II: Pre-Drywall Inspection occurs after the framing is in place, the electrical wiring has been run and the plumbing lines have been placed. This should occur before the drywall and bricks are put in place. Inspector looks for proper attachments to the foundation, electrical wiring and termination, plumbing setups, any disconnected plumbing, nailing plates where required, proper window operation, observe the ducts for damage or disconnection, ensure fasteners are in all holes at the joist hangers, ensure framing of the structure was completed to standards, ensure the flashing is placed around windows and other penetrations, and that the exterior sheathing is sealed to create a water-resistive barrier. Inspector does not inspect the roof at this phase as there is much that is incomplete, however, he will check for obvious points of water entry.
• 
  

• The final inspection occurs a few day before your scheduled walk-through with your builder. Also known as the comprehensive new home inspection, the final inspection satisfies the Standard of Practice as delineated by the Texas Real Estate Commission (TREC). Your final inspection will focus on structural, operational, mechanical, plumbing and safety issues. Please see Home Inspection - Slab Foundation for pricing based on your square footage.
• 
  

• The home warranty inspection includes a comprehensive home inspection, infrared inspection and pest and termite inspection.
• 
  

*Click here for more details. Over $650 Value includes:

1. Phase 2: Pre-Drywall Inspection
2. Phase 3: Final Inspection
   
   

*Click here for more details. Over $800 Value includes:

1. Phase 3: Final Inspection
2. 11 Month Home Warranty Inspection
   
   

*Click here for more details. Over $850 value includes:

1. Phase 1: Pre-Pour Inspection
2. Phase 2: Pre-Drywall Inspection
3. Phase 3: Final Inspection
   
   

*Click here for more details. Over $1,050 Value includes:

1. Phase 1: Pre-Pour Inspection
2. Phase 2: Pre-Drywall Inspection
3. Phase 3: Final Inspection
   
4. Phase 3: Repair Verification
   
   

*Click here for more details. Over $1,250 Value includes:

1. Phase 1: Pre-Pour Inspection
2. Phase 2: Pre-Drywall Inspection
3. Phase 3: Final Inspection
   
4. 11 Month Home Warranty Inspection
   
   

*Click here for more details. Over $1,700 Value includes:

1. Phase 1: Pre-Pour Inspection
2. Phase 1: Repair Verification
3. Phase 2: Pre-Drywall Inspection
4. Phase 2: Repair Verification
5. Phase 3: Final Inspection
   
6. Phase 3: Repair Verification
7. 11 Month Home Warranty Inspection
   
   

• +35 cents per sq ft over 4,500 sq ft - Please call the office to schedule

• +35 cents per sq ft over 4,500 sq ft - Please call the office to schedule
  
  

• +35 cents per sq ft over 4,500 sq ft - Please call the office to schedule

• +35 cents per sq ft over 4,500 sq ft - Please call the office to schedule
  
  

• +35 cents per sq ft over 4,500 sq ft - Please call the office to schedule

• +35 cents per sq ft over 4,500 sq ft - Please call the office to schedule
  
  

• Quickly and easily turn our home inspection report into an easy-to-read, incredibly accurate repair estimate. With 98% accuracy the pricing report is fair, realistic and widely accepted as the industry standard. This is the ONLY pricing tool approved by the Texas Real Estate Commission. GreenWorks has partnered with Repair Pricer and offers this as an add-on for all home inspections. The Repair Pricing Report will be generated in 24 hours after you receive your report and can be added at any time for $49.99.
  
• 
  

• Infrared (thermal imaging) is an advanced, non-invasive technology that allows the inspector to show homeowners things about their homes that can’t be revealed using conventional inspection methods. infrared inspection can identify and document moisture intrusion, energy loss, and even unexpected hot spots. For more details check out our Infrared Page: GreenWorks Infrared
• 
  

• This service is available with a home inspection only. Not to be purchased as a stand alone service.
• 
  

• This inspection is a stand a lone service, not included with a general home inspection. This inspection includes a visual inspection for termites and other wood destroying organisms. This inspection includes a Wood Destroying Insect Report (WDI) outlining if active termites, previous termites or conducive conditions are present on the property.
• 
  

• GreenWorks offers mold inspections for residential and commercial properties. Our service comes with four (4) samples for properties under 4000 sq. ft. We will do air samples, swab samples or tape samples depending on the particular situation. Please call at 855-349-6757 for more details. If you would like to add additional samples the price is $75.00 per sample.
• 
  

• A septic inspection is used to locate system components, observe how the system functions and if the system is in need of repair to function properly using visual-only, non-invasive inspection techniques.  Occasionally, the tanks and risers are buried and the locations cannot be determined, in which case it has likely not been pumped or inspected in several years.  The inspection includes running all of the plumbing fixtures, looking for effluent at the surface of the drainfield, dipping the tank to determine depth of sludge and scum levels, assessing if the tank covers are watertight and in fair condition, and checking equipment for safety or mechanical issues.  We also look for proper clearances to property lines, wells and other water sources to ensure the system is not creating an environmental impact.
• 
  

• A radon Inspection is a two part inspection which allows the inspector to come into the home setup the test and return in 3-5 days to retrieve the sample. Then the sample is sent to the lab to be analyzed. Once completed a report is written and emailed to the client.
• 
  

• This is for the whole house (interior and exterior) includes a Visual Assessment, Lead-Based Paint Inspection and Stabilization Plan. The lead paint inspection is a non-invasive inspection and tests about 150-200 areas of house.
• 
  

• This is for the whole house (interior and exterior) includes a Visual Assessment, Lead-Based Paint Inspection and Stabilization Plan. The lead paint inspection is a non-invasive inspection and tests about 250-300 areas of house.
• 
  

• Client selects 10 deficiencies or less from their home inspection report to be verified.
• No appointment time will be set. The inspector will complete this within 48 hours of scheduling. 
• Any GreenWorks Inspector will be assigned.
• 
  

• Client selects 10 deficiencies or less from their home inspection report to be verified.
• A specific date will be set, but the appointment time will only be provided the morning of the re-inspection. The inspector will complete this within 48 hours of scheduling. 
• Any GreenWorks Inspector will be assigned.
• 
  

• The entire summary page of deficiencies will be re-inspected for verification.
• A scheduled appointment date and time will be set.
• The GreenWorks Inspector who did the the original inspection will be assigned.
• Any GreenWorks Inspector will be assigned.
• 
  

• Apartment complexes with more than 20 units - Get each full unit inspected (interior and exterior) plus a termite inspection! This includes the roof, plumbing, electrical, mechanical, HVAC, appliances, walls, doors, ceilings etc. Slab foundation only. To actually set the appointment and purchase please call us at 855.349.6757 or email us at Support@GreenWorksServiceCo.com

• Apartment complexes with 10-19 units can take advantage of this spectacular deal! Get each full unit inspected (interior and exterior) plus a termite inspection! This includes the roof, plumbing, electrical, mechanical, HVAC, appliances, walls, doors, ceilings etc. Slab foundation only. To actually set the appointment and purchase please call us at 855.349.6757 or email us at Support@GreenWorksServiceCo.com

• Pier and Beam Inspection have an additional cost depending on the size of apartments. Call us at 855.349.6757 for details.
•